Free solar sizing tool
What do you want your solar system to power?
Choose appliances, set your backup needs and get an indicative system estimate. Save the results as a PDF or spreadsheet, or send them to Leaf Solar for a review.
Step 1 of 3
What do you want to power?
Choose appliances below. You can adjust their actual rated input watts.
Checking saved estimate…
Step 2 of 3
Add usage details
Use the input watts on the appliance label, not horsepower or cooling output. Appliance presets are examples, not measured values.
Choose an appliance above to begin.
How do I choose a starting surge?
Motors and compressors can briefly draw several times their running power. Selecting an inverter appliance sets its starting multiplier to ×1 as an initial assumption; switching back restores the previous non-inverter multiplier. Some inverter models can still have a start-up transient, so ×1 is not guaranteed. You can adjust the multiplier. Presets are rough estimates; use the manufacturer’s starting current and duration when available. If unknown, ask our installer.
Step 3 of 3
Set your backup preferences
Backup assumes all selected loads run continuously together for the full backup period. This conservative estimate can be larger than your actual usage. Peak sun hours vary by location, season, shade and orientation; 4.5 is an adjustable assumption, not a site measurement.
Explore your options
Find the right starting point
Published packages are examples, not verified matches. Battery capacity, inverter surge, panels, installation and stock must be checked for your estimate.
Catalogue starting point
1.5KVA OFFGRID Solar Package (1x 220AH Tubular Battery)
₦1,100,000
Availability and final scope to be confirmed
Catalogue starting point
1.7KVA OFFGRID Solar Package (2x 220AH Tubular Batteries)
₦1,500,000
Availability and final scope to be confirmed
Catalogue starting point
2.5KVA OFFGRID Solar Package (2x 220AH Tubular Batteries)
₦1,700,000
Availability and final scope to be confirmed
List what you run
Add each appliance you want powered during an outage — lights, television, fridge, air conditioner, pump, freezer. Enter its wattage and how many hours a day it runs.
Account for surge
Motor loads may draw more power at start-up. The calculator estimates one motor start separately from continuous inverter sizing; the installer must check actual surge ratings.
Explore your options
Browse published package starting points, or share the estimate with Leaf Solar. Package suitability, price, availability and installation need confirmation.
How to read your estimate
Three numbers drive every solar system, and the calculator reports all three:
- Running load (W) \u2014 What your appliances draw at the same moment. This sets the inverter size.
- Starting surge (W) \u2014 An estimate for one motor starting while the other selected loads run. Real surge current and inverter rating need verification.
- Daily energy (Wh) \u2014 Total daily consumption is used for an indicative panel array. Battery size uses your requested backup hours at the full selected running load.
The panel estimate uses adjustable peak sun hours and an assumed system performance ratio. The battery estimate assumes all selected loads run continuously for the backup duration; actual site design can differ.
See solar installation packagesSizing questions
How does the solar calculator estimate my system size?
It totals selected appliance wattage and daily energy, estimates one motor starting while the others run, and uses your backup duration, battery type and peak sun hours for indicative sizing. It assumes all selected loads run together during backup; your installer must verify surge capability and your site.
What is starting surge and why does it matter?
Motor-driven appliances can briefly draw several times their running wattage at startup. The estimate considers one motor start at a time. Manufacturer specifications, simultaneous starts and the inverter surge rating and duration must be checked separately.
Is the calculator result a final quotation?
No. It is an indicative sizing estimate. The final equipment list, battery chemistry, cable routes and installation scope are confirmed in a written quotation after Leaf Solar reviews your actual load and site.
Should I choose a tubular or lithium battery system?
Tubular batteries cost less initially but need maintenance and tolerate shallower discharge. Lithium batteries cost more up front, allow deeper usable capacity, charge faster and last longer, which typically lowers the cost per usable kilowatt-hour over the system life.
Does the calculator work for shops and offices?
Yes. Enter every appliance or load you want to run during an outage, including freezers, air conditioners, lights, computers and pumps. Commercial and industrial systems are then sized with the same method and confirmed on site.